Recent Posts

Pages: [1] 2 3 ... 10
1
General Discussion / rr 50 wiring diagram
« Last post by whizzz bang on February 12, 2018, 07:55:43 AM »
hi I'm after a wiring diagram for a rr 50
cheers
2
Pictures and Videos / Re: 2012 MRT50 Models
« Last post by Mackenzie on February 07, 2018, 01:09:13 AM »
I agree with your opinion very much. 
3
General Discussion / Re: Rieju Mrx 125 swingarm compatibility
« Last post by Mackenzie on February 07, 2018, 01:09:01 AM »
This information is very helpful to me.
4
General Discussion / Re: Hello! New (to me) MRT 125/200
« Last post by kevin..in on January 20, 2018, 04:01:08 AM »
took it for it's first MOT today, passed with no advisories!!!!!  ;D
5
General Discussion / Re: Rieju Mrx 125 swingarm compatibility
« Last post by Marcel125 on January 19, 2018, 11:05:57 AM »
For any parts you’d need I suggest you check out riejuparts if you haven’t yet. They stock 95% of parts for your exact bike
6
General Discussion / Re: RS3 125 Poor Running & Carb Settings?
« Last post by Marcel125 on January 19, 2018, 11:03:55 AM »
If you have tried to adjust the carb settings try putting them back to what they were, then remove the carb clean out the jets and bowl. Also clean or replace the air filter. Check your sparkplug too, it is is wet dry it off with a lighter for some time.

These are the things I do when mine starts to faff about due to the jetting in mine depending on the weather. Ps mines highly modified so I wouldn’t expect yours to be difficult
7
General Discussion / Re: Rieju Mrx 125 swingarm compatibility
« Last post by mhoch3 on January 16, 2018, 12:33:20 PM »
Hi,

I just compared the swingarm of the 50cc and 125cc version on the website you mentioned. It's (0/000.020.5200) for both of them eventough it's the 2005 version which already has a newer chain tensioner system. So i hope they used the same swingarm for both versions before 2005 as well.  By the way the seller replied to me and gave me the measurements of his swingarm. They are basically the same as what i measured eventough they differ in some millimeters which i hope is because of inaccurate measuring. I guess i'm gonna risk it. Which me good luck.
8
General Discussion / Re: Rieju Mrx 125 swingarm compatibility
« Last post by kevin..in on January 16, 2018, 11:05:47 AM »
have a look at the parts lists here to if it is indeed the same part
https://www.riejuparts.co.uk/
9
General Discussion / Rieju Mrx 125 swingarm compatibility
« Last post by mhoch3 on January 16, 2018, 01:17:20 AM »
Hey guys,

I bought a Mrx 125 (2003) last week which needs a new swingarm. Unfortunately i can't really find parts for the 125cc version here in germany. I found a swingarm on ebay which looks exactly like the one i have but the seller can't tell me if its for the 50cc or the 125cc version. So does anybody know if rieju used the same swingarm for both versions?
10
General Discussion / Re: Hello! New (to me) MRT 125/200
« Last post by kevin..in on January 14, 2018, 01:19:21 AM »
sorry that image seems to be mahooosive!!
Pages: [1] 2 3 ... 10