Author Topic: Rieju Tango 250  (Read 4691 times)

pareas6

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Rieju Tango 250
« on: June 18, 2013, 08:33:28 AM »
spare parts and information

pareas6

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #1 on: June 18, 2013, 08:37:55 AM »
Hello guys, I own a rieju tango 250 model of 2009. I need a dellórto inlet manifold. Does anyone know how much will cost and were I can get one? Unfortunately I cannot find through my local dealer. Any help?

admin

  • Administrator
  • Newbie
  • *****
  • Posts: 19
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #2 on: June 19, 2013, 04:53:12 AM »
Hmmm, I did some searching and could not find it either. Please let us know where you end up finding one. Can anyone help this guy out?

ianswebb

  • Newbie
  • *
  • Posts: 48
  • Currently running an RS2 125 NKD
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #3 on: June 20, 2013, 04:54:01 PM »
Is that the factory inlet? If so, maybe try contacting Rieju UK directly? Assuming your in the uk of course!

I did have a phone number for them, ill have a look about and see if ive still got it. Although ive not contacted them directly, they seemed pretty helpful.

pareas6

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #4 on: June 26, 2013, 08:50:35 PM »
Thanks for your answers!
I contacted the dealer in UK (even though I don't leave in UK) as well as dealers from spain. That part costs over 160 Euros. I think the part is well overvalued at that price for a piece of rubber. If you have any thoughts or recommendations are welcome. Yes thats the factory inlet'.

Thank you guys

ianswebb

  • Newbie
  • *
  • Posts: 48
  • Currently running an RS2 125 NKD
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #5 on: June 27, 2013, 05:18:18 AM »
Does the tango 250 have a yamaha/mineralli engine? Ive looked through a few pictures online and it seems to have a very similar looking engine to the Yamaha TTR 250. I have an RS2 125 which has the same engine at the TTR 125. Should i be requiring any engine parts ill quote that at my local yam dealer.

It maybe worth doing some digging around to see if this is the case. Then you can pop into your local Yamaha dealer, ask for an inlet manifold for a TTR 250 and they should be able to get you one with no bother... dont mention you have a Rieju as they will more than likely give you a blank look and send out out the door!

Ive downloaded a tango 250 owners manual but couldnt find any engine details in there.. hopefully it will be hidden behind some sticky decals, like it was on mine!

ianswebb

  • Newbie
  • *
  • Posts: 48
  • Currently running an RS2 125 NKD
    • View Profile
    • Email
Re: Rieju Tango 250
« Reply #6 on: June 27, 2013, 11:30:47 AM »
Correction - The RS2 has the same engine as the YBR 125